Manipolatore Minipartner

TECHNICAL CHARACTERISTICS OF PNEUMATIC MANIPULATORS MINIPARTNER

Minipartner


Model MPS
Max weight capacity: 80 Kg
Max vertical lifting speed: 0,5 meters / second
∞360° rotation on tooling axis
Vertical lift: 1800 mm
Control system: solely pneumatic
Supply: filtrated compressed-air (40 µm), not lubricated
Working pressure: 0.7 ÷ 0.8 Mpa
Working temperature: from +0° to +45° C
Noise level: <70 dB
Consumption: from 10 Nl ÷ 20 Nl per working cycle

Model MPS Plus 6
Max weight capacity: 170 Kg - (220 kg Plus 8)
Max vertical lifting speed: 0,5 meters / second
∞360° rotation on tooling axis
Vertical lift: 2000 mm
Control system: solely pneumatic
Supply: filtrated compressed-air (40 µm), not lubricated
Working pressure: 0.7 ÷ 0.8 Mpa
Working temperature: from +0° to +45° C
Noise level: <70 dB
Consumption: from 20 Nl ÷ 80 Nl per working cycle


MANIPOLATORE A FUNI MINIPARTNER
Pneumatic Manipulator MINIPARTNER with double cable equipped with simple gripping tools, allows the handling of light loads in a weightless condition, throughout the working area. The gripping tool is connected to the balancing group by two independent steel cables to guarantee max safety. Generally overhead mounted with double track system, it offers an easy translation in order to cover a long working area.

colonna di fissaggio
colonna di fissaggio
colonna di fissaggio
colonna di fissaggio
colonna di fissaggio
colonna di fissaggio

MANIPULATOR MINIPARTNER WITH DOUBLE CABLE
Pneumatic Manipulator MINIPARTNER with double cable equipped with simple gripping tools, allows the handling of light loads in a weightless condition, throughout the working area. The gripping tool is connected to the balancing group by two independent steel cables to guarantee max safety. Generally overhead mounted with double track system, it offers an easy translation in order to cover a long working area.


OPERATION
A pneumatic cylinder fed with compressed-air, combined with a transmission cables system provides balance to the load weight applied.
The cylinder force is controlled through two pneumatic circuits purposely arranged: the first one always keeps the weight system balanced; the second one provides to always keep the weight load balanced.
The operator can change the load level applying a minimum force on the gripping tool or directly on the load.


Dalmec can manufacture the Manipulator Minipartner completely in stainless steel.
The Manipulator and the gripping equipments are built according to specifically developed projects in relation to the well-known need for cleanliness in the pharmaceutical - food - chemical industry and in sterile environments.
The structure is realised using AISI 304 stainless steel with few parts in AISI 420/421. Welding is mostly performed using MAG and MIG methods in an inert gas atmosphere; major welds, from an aesthetic and functional standpoint, are ground and smoothed. Visible surfaces are polished and brush-finished
.


Explosion-proof version in conformity with ATEX Directive

The pneumatic Manipulators Dalmec can be supplied in explosion-proof version in conformity with ATEX Directive, suitable for the installation of the Manipulator in explosion-risk environment classified as zone 1 or 2.

The certification is made in our plant by the qualified Engineer of a Notified Body according to the ann. IX 94/9/EC-ATEX Directive, which ensures the total conformity of the Manipulator with the Directive.


 

BALANCING SYSTEMS

Preselector
It allows a fast presetting of the load balancing effect in case of weight change.


Up/down lever
It allows the lifting and handling of the load in a quick, precise and linear way, without any adjustments, simply actioning a lever control.


Automatic
t allows the load balancing by actioning a pneumatic pushbutton after lifting the load through a pneumatic lever control.

 

 

 

MINIPARTNER OVERHEAD RUNNING MOUNTED

Fixing
The Manipulator is supplied with overhead trolleys to run in a track system..

 

Running system

The running system is composed of two main parts:

Mono rail bridge crane, composed of one special cold rolled section complete with trolleys to slide manually in the tracking and with compressed-air supply spiral.

Dual rail tracking composed of two tracks in a special cold rolled metallic section, complete with suspension brackets approx. every 2500 mm and with end buffers.

 

Suspension on the support structure

The track suspension on the support structure is done with rods and suspension brackets.