Pneumatic Manipulator MAXIPARTNER MX with articulated arms, equipped with special gripping tools, is suitable to handle heavy (max 900 kg) and also off-set loads, in any direction, allowing the operator to work with the minimum effort in good ergonomic and safety conditions.
Technical characteristics of pneumatic Manipulators Maxipartner MX
Max weight capacity 900 Kg
Max working radius: 4500 mm
Max vertical lifting speed: 0,5 meters/second
Constant 360° rotation on the column and tooling axis – 300° rotation on the intermediate axis
Vertical lift: 2200 mm
Control system: solely pneumatic
Supply: filtrated compressed-air (40 µm), not lubricated
Working pressure: 0.7 ÷ 0.8 Mpa
Working temperature: from +0° to +45° C
Noise level: <70 dB
Consumption: from 100 Nl ÷ 400 Nl per working cycle
The explosion-proof execution is possible according to ATEX Standard
The graphic outlines the weight-capacity of the Manipulator (kg) according to the working radius.
VERSION
Column mounted MXC
Overhead mounted MXF
Overhead trolley mounted MXS
OPERATION
A pneumatic cylinder fed with compressed-air, combined with a transmission lever system, provides balance to the load weight applied.
The cylinder force is controlled through two pneumatic circuits purposely arranged: the first one always keeps the weight system balanced; the second one provides to always keep the weight load balanced.
The operator can change the load level applying a minimum force on the gripping tool or directly on the load
BALANCING SYSTEMS
Up/down lever
It allows the lifting and handling of the load in a quick, precise and linear way, without any adjustments, simply actioning a lever control.
Pushbutton lever
It allows the load balancing by actioning a pneumatic pushbutton after lifting the load through a pneumatic lever control.
