Posifil

  • Manipulators with Cable
140 kg
Posifil

Features

  • Max weight capacity: 140
  • Max working radius: 3000 mm
  • Vertical lift: 1800 mm
  • Working pressure: 0.7 ÷ 0.8 Mpa
  • Control system: solely pneumatic
  • Supply: filtrated compressed-air (40 µm), not lubricated
  • Noise level: <70 dB
  • Max vertical lifting speed: 0,5 meters/second
  • Working temperature: from +0° to +45° C
  • Consumption: from 20 Nl ÷ 100 Nl per working cycle
  • Rotations: – constant 360° on the column and tooling axis - 300° on the intermediate axis

Execution

  • Atex Column
  • Atex Fixed Overhead
  • Atex Overhead Running
  • Column
  • Fixed Overhead
  • Inox Column
  • Inox Fixed Overhead
  • Inox Overhead Running
  • Overhead Running

MANIPULATOR WITH DOUBLE CABLE POSIFIL PF – CABLE BALANCER
Pneumatic Manipulator POSIFIL PF with double cable equipped with simple gripping tools, allows the handling of light loads in a weightless condition, throughout the working area. The gripping tool is connected to the balancing group by two independent steel cables to guarantee max safety. The particular double arm structure and middle joint makes it easy to operate within the entire working area.


OPERATION
A pneumatic cylinder fed with compressed-air, combined with a transmission cables system provides balance to the load weight applied.
The cylinder force is controlled through two pneumatic circuits purposely arranged: the first one always keeps the weight system balanced; the second one provides to always keep the weight load balanced.
The operator can change the load level applying a minimum force on the gripping tool or directly on the load.

 

Fixed plate for floor anchoringAutostable base-plate for forklift truckAutostable base-plate for pallet truck
Base normaleBasamento carrello elevatoreBasamento transpallet
Manual autostable base-plateTrolley mounted base-plateFloor built-in track

Anchor flange
The pneumatic manipulator fixed overhead version allows to eliminate any floor obstructions.
The flange of the Manipulator is supplied with holes for the anchoring with screws to a strong plate to the ceiling or to a shelf.
All movements are free and are obtained with minimum effort by the direct action of the operator on the gripping tooling or on the load.

 

 

Anchor
The Manipulator is supplied with an overhead trolley to run in a tracking system.
Tracking system
The tracking system is composed of two opposite aluminium U sections with connecting and stiffening ribs,complete with attachment points for an overhead suspension and end buffers. The junction between the various parts is done with screws.
Attachment
The attachment of the tracking system to the supporting structure is carried out by means of rods and suspension brackets

 

 

Documents