Maxipartner
Features
- Maks. keliamoji galia: 900 kg
- Maks. darbinis spindulys: 4500 mm
- Vertikalus pakėlimas: 2200 mm
- Darbinis slėgis: 0.7 ÷ 0.8 Mpa
- Valdymo sistema: tik suslėgtasis oras
- Tiekimas: filtruotas suslėgtasis oras (40 µm), be alyvos
- Maks. kėlimo greitis vertikalia kryptimi: 0,5 metro per sekundę
- Darbinė temperatūra: nuo +0 °C iki +45° C
- Triukšmo lygis: <70 dB
- Sąnaudos: nuo 100 Nl ÷ 400 Nl per darbinį ciklą
- Sukimasis: – nuolatinis 360° ant kolonos ir įrankių ašies – 300° ant tarpinės ašies
Execution
- ATEX fiksuotas viršuje
- ATEX judantis viršuje
- ATEX kolona
- Fiksuotas viršuje
- Judantis viršuje
- Kolona
- Nerūdijančio plieno fiksuotas viršuje
- Nerūdijančio plieno judantis viršuje
- Nerūdijančio plieno kolona
MANIPULATOR WITH ARTICULATED ARMS MAXIPARTNER EQUO ME
Pneumatic Manipulator MAXIPARTNER EQUO ME with articulated arms, equipped with special gripping tools, is suitable to handle heavy (max 900 kg) and also off-set loads, in any direction, allowing the operator to work with the minimum effort in good ergonomic and safety conditions.
Its slim and strong structure eliminates the “drifting” effect.
OPERATION
A pneumatic cylinder fed with compressed-air, combined with a transmission lever system, provides balance to the load weight applied.
The cylinder force is controlled through two pneumatic circuits purposely arranged: the first one always keeps the weight system balanced; the second one provides to always keep the weight load balanced.
The operator can change the load level simply operating a pneumatic control lever.
| Fixed plate for floor anchoring | Autostable base-plate for forklift truck | Autostable base-plate for pallet truck |
 |  |  |
Anchor flange
The pneumatic manipulator fixed overhead version allows to eliminate any floor obstructions.
The flange of the Manipulator is supplied with holes for the anchoring with screws to a strong plate to the ceiling or to a shelf.
All movements are free and are obtained with minimum effort by the direct action of the operator on the gripping tooling or on the load.
Anchor
The Manipulator is supplied with an overhead trolley to run in a tracking system.
Tracking system
The tracking system is composed of two opposite aluminium U sections with connecting and stiffening ribs,complete with attachment points for an overhead suspension and end buffers. The junction between the various parts is done with screws.
Attachment
The attachment of the tracking system to the supporting structure is carried out by means of rods and suspension brackets