PosifilMax weight capacity: 200 Kg
Max working radius: 4500 mm
Max vertical lifting speed: 0,5 meters/second
Vertical lift: 1900 mm
Control system: solely pneumatic
Supply: filtrated compressed-air (40 µm), not lubricated
Working pressure: 0.6 ÷ 0.8 Mpa
Working temperature: from +0° to +45° C
Noise level: <70 dB
Consumption: from 40 Nl ÷ 120 Nl per working cycle
Rotations: – constant 360° on the column and tooling axis
– 315° on the intermediate axis


icona PDFDownload pdf Posiplus



POSIPLUS PP is a double cable manipulator with high load capacities, capable of handling loads up to 200 kg and reaching working radii up to 4500 mm. The gripping tooling is connected to the balancing group through two independent steel cables to ensure maximum safety. The particular double-arm structure with intermediate joint makes it easy to operate within the entire working area. Specific brakes mounted on the main joints guarantee control of drift movements.

A pneumatic cylinder fed with compressed-air, combined with a transmission cables system provides balance to the load weight applied.
The cylinder force is controlled through two pneumatic circuits purposely arranged: the first one always keeps the weight system balanced; the second one provides to always keep the weight load balanced.
The operator can change the load level applying a minimum force on the gripping tool or directly on the load.


It allows a fast presetting of the load balancing effect in case of weight change.
Up/down lever
It allows the lifting and handling of the load in a quick, precise and linear way, without any adjustments, simply actioning a lever control.
Lever pushbutton
It allows the load balancing by actioning a pneumatic pushbutton after lifting the load through a lever control.
It allows automatic load balancing without any adjustment, after having simply actioned the gripping through proper controls.





Posifil Posifil Posifil
Anchor systems:
* Fixed base-plate
* Portable base-plate for forklift truck transfer
* Portable base-plate for pallet truck transfer
* Portable base-plate for manual transport
* Trolley mounted base-plate for floor tracks.
* Floor built-in track.
Anchor flange
The pneumatic manipulator Posiplus overhead version allows to remove any floor obstructions.
The flange of the Manipulator is supplied with holes for the anchoring with screws to a strong plate to the ceiling or to a shelf.
All movements are free and are obtained with minimum effort by the direct action of the operator on the gripping tooling or on the load.
The Manipulator is supplied with an overhead trolley to run in a tracking system.
Tracking system
The tracking system is composed of two opposite aluminium U sections with connecting and stiffening ribs,complete with attachment points for an overhead suspension and end buffers. The junction between the various parts is done with screws.
The attachment of the tracking system to the supporting structure is carried out by means of rods and suspension brackets.

Anchorage systems to the floor for the Manipulators column mounted version

Fixed base-plate for floor anchoring
Autostable base-plate for forklift truck
Autostable base-plate for pallet truck
Manual autostable base-plate
Trolley mounted base-plate
Floor built-in track system
Base normale Basamento carrello elevatore Basamento transpallet
The base plate of the column is supplied with holes designed for the floor fastening through anchoring screws or bolts. The column is fixed on the autostable base-plate, designed to allow the transfer with a forklift truck in different working areas The column is fixed on the autostable base-plate, designed to allow the transfer with a pallet truck in different working areas.
The autostable base-plate allows the manual transport of the Manipulator in different working areas. The front wheels can be hydraulically lowered.
Autostable trolley base-plate suitable for the running on a dual track runway, composed of two stainless steel plates placed on the floor. The base-plate is completed with motorization and safety locks.
The Manipulator is fixed on a trolley running on track supplied in double U profile, complete with supporting structure and upper telescoping at floor level. This solution is suitable for a floor built-in application.