• Manipulators with Cable
80 kg


  • Max weight capacity: 80 kg
  • Vertical lift: 1800 mm
  • Working pressure: 0.7 ÷ 0.8 Mpa
  • Control system: solely pneumatic
  • Supply: filtrated compressed-air (40 µm), not lubricated
  • Noise level: <70 dB
  • Max vertical lifting speed: 0,5 meters/second
  • Working temperature: from +0° to +45° C
  • Consumption: from 10 Nl ÷ 20 Nl per working cycle
  • Rotation: 360° on tooling axis


  • Atex Column
  • Atex Fixed Overhead
  • Atex Overhead Running
  • Column
  • Fixed Overhead
  • Inox Column
  • Inox Fixed Overhead
  • Inox Overhead Running
  • Overhead Running


Pneumatic Manipulator MINIPARTNER with double cable equipped with simple gripping tools, allows the handling of light loads in a weightless condition, throughout the working area. The gripping tool is connected to the balancing group by two independent steel cables to guarantee max safety. Generally overhead mounted with double track system, it offers an easy translation in order to cover a long working area.

A pneumatic cylinder fed with compressed-air, combined with a transmission cables system provides balance to the load weight applied.
The cylinder force is controlled through two pneumatic circuits purposely arranged: the first one always keeps the weight system balanced; the second one provides to always keep the weight load balanced.
The operator can change the load level applying a minimum force on the gripping tool or directly on the load.


The Manipulator is supplied with overhead trolleys to run in a track system.

Running system
The running system is composed of two main parts:Mono rail bridge crane, composed of one special cold rolled section complete with trolleys to slide manually in the tracking and with compressed-air supply spiral.Dual rail tracking composed of two tracks in a special cold rolled metallic section, complete with suspension brackets approx. every 2500 mm and with end buffers.

Suspension on the support structure
The track suspension on the support structure is done with rods and suspension brackets.

Stainless steel version

Dalmec can manufacture the Manipulator Minipartner completely in stainless steel.
The Manipulator and the gripping equipments are built according to specifically developed projects in relation to the well-known need for cleanliness in the pharmaceutical – food – chemical industry and in sterile environments.
The structure is realized using AISI 304 stainless steel with few parts in AISI 420/421. Welding is mostly performed using MAG and MIG methods in an inert gas atmosphere; major welds, from an aesthetic and functional standpoint, are ground and smoothed. Visible surfaces are polished and brush-finished.


Explosion-proof version in conformity with ATEX Directive

The pneumatic Manipulators Dalmec can be supplied in explosion-proof version in conformity with ATEX Directive, suitable for the installation of the Manipulator in explosion-risk environment classified as zone 1 or 2.
Also the Manipulators for the handling of bags and boxes equipped with electric pumps are included.
The certification is made in our plant by the qualified Engineer of a Notified Body according to the ann. IX 2014/34/UE-ATEX Directive, which ensures the total conformity of the Manipulator with the Directive.


Coils of wire

Manipulator Minipartner for coils of wire overhead trolley mounted